Labom provide a wide range of Pressure transmitters and Pressure gauges, along with diaphragm seals to provide a complete solution for Hygienic Pressure Measurement. Labom’s Digital Pressure Transmitters, Analogue Pressure Transmitters, Differential Pressure Transmitters and Mechanical Pressure Gauges can be combined with any of the diaphragm seals for use in general, chemical and hygienic applications.
Labom Analogue Pressure Transmitters
COMPACT (for general applications)
Pressure transmitter in robust design for use in tough environments.
- Measuring ranges 0…1 bar up to 0…400 bar
- Linearity error including hysteresis Piesoresistive measuring system
- Internal diaphragm or Flush mounted diaphragm
- Wetted parts of stainless steel; completely welded
- Stainless steel housing as standard or field housing
- Degree of protection IP 65, IP 67 option
- Output signal: 4…20 mA
- Process temperature up to 140 °C (short term, for sterilisation)
COMPACT (for Food, Pharmaceutical & Biotechnology applications)
Extra features:
- Measuring ranges 0…250 mbar up to 0…100 bar
- Hygienic design according to EHEDG, FDA und GMP recommendations
- Material and surface quality according to the hygienic requirements
- Process temperature up to 200 °C
COMPACT (Chemical & Petrochemical applications)
Extra features:
- Measuring ranges 0…250 mbar up to 0…400 bar
- Separating foil from stainless steel or special materials
- Completely encapsulated electronics
- Stainless steel housing as standard or field housing
- Process temperature up to 200 °C
UNIVERSAL (for general applications)
Relative and absolute pressures, overload protected.
- Wetted parts of stainless steel, completely welded
- Measuring ranges 0…160 mbar up to 0…400 bar rel., 0…0.4 bar up to 0…25 bar abs
- Piesoresistive sensor element
- Measuring system overload protected
- Zero point and measuring span can be adjusted externally by means of a potentiometer
- Internal diaphragm type or Flush mounted diaphragm type
- Stainless steel housing as standard or field housing
- Degree of protection IP 65, option: IP 67
- Output signal: 4…20 mA, option: 0…20 mA, 0…10 V DC
UNIVERSAL (thin film DMS)
Extra features:
- Thin film sensor element
- Measuring ranges 0…40 bar up to 0…600 bar rel.
UNIVERSAL (for diaphragm seals)
Extra feature:
- Diaphragm seal operation with reduced inner volume
With BOURDON TUBE
Mechanical safety pattern gauge with local indication and integral electronic angle-of-rotation sensor.
- Pressure transmitter with local indication for measuring the relative and absolute pressures
- Safety pattern gauge S3, DN 100 and 160, per EN 837-1, alternatively S1
- Nominal range 0…0.6 up to 1000 bar
- Output signal: 4…20 mA (20…4 mA) 2-wire circuitry
- Nominal ranges 0…0.6 to 1000 bar
- Integrated angle-of-rotation sensor, not subject to wear
- Explosion protection for gases and dust
- Additional contact device available
- Diaphragm seals available
- Easy zero correction using a magnet
- Next day delivery
- Supply from Stock
- Free Technical Support
- Extended Warranties
- Competitive Prices
- Complete packages
