Plastic Air Valves

Plastic Air Valves can come in all forms; Air Release, Air Vacuum and combination but are often limited by pressure. The benefits, over metal forms of Air Valves, is their low weight and often their cost, being significantly more economical.

The Plastic Air Vacuum Air Valve is designed around the basis of a Ball Check Valve where a spherical floating ball is the valve component that releases air on filling but once seated prevents the escape of liquid from a pipeline. Mounted in the vertical, often off a pump housing, it remains in position whilst the system is pressurised and does not release accumulated air. Simple to maintain and clean they are an economical solution to priming pumps in Water Industry pumping stations.

The Plastic Combination Air Valves are compact, lightweight and typically have a rolling seat arrangement which can release gases whilst the system is under pressure. Available with up to a DN50 inlet with either BSP or NPT male connections, the valve is designed with a relatively large orifice so large volumes of air can pass during filling and draining of the system.

Manufactured in materials including PVC, ABS, valve sizes typically range from DN10 to DN100 with threaded, solvent welded or flanged connections. These valves are used on neutral and aggressive gases and liquids, sludges & slurries, wastewater and clean water, meeting UK DWI standards.

Our technical team are on hand to offer any information regarding our range of Plastic Air Valves. We would be happy to hear from you on 01704 898980 or alternatively, email

We are currently in the process of updating and adding products to the website. If you have any questions or require technical advice please contact us using the form below.

There are many variants of this product available, which we hold in stock. Free technical support is available to help specify your product.

Your Name (required)

Your Email (required)

Your Company (required)


Your Message

Get the latest news and offers